Solid-State Dip-Switch Timers, THL11023E Timers, Airotronics

  Products

Solid-State Dip-Switch Timers - THL11023E Timers

Solid-State Dip-Switch Timers - THL11023E Timers
THL11023E Timer

THL11023E is a solid-state timer in a compact 2" x 2" configuration. Any time period between 1 second and 1023 seconds is available in 1 second increments and can be set with the dip switch. The advanced digital circuitry provides this timing module with unsurpassed accuracy and reliability.

Timing Mode

Application of input voltage to the timer energizes the load and starts the time delay. At the end of the time delay, the load is de-energized. Removal and re-application of input voltage re-sets the timer.

FEATURES
  • Operates at 120 or 230 volt, 50/60Hz
  • Time range of 1 to 1023 seconds in 1 second increments
  • Binary dip-switch is easy to program
  • Digital timing accuracy
  • Time setting accuracy of 5% of set point
  • Repeatability of 0.1%
  • Extremely low off-state leakage current
  • Eliminates contactor “hum”
  • Compact, easy to hook up, in-line installation
  • Vertical mounting option available with MB-1 Bracket
  • Totally encapsulated for protection from harsh environments
  • 100% Operational testing before shipping
BASIC WIRING AND DIMENSIONS
SPECIFICATIONS

Repeat Accuracy: 0.1% under fixed conditions

Timing Ranges:

  • 1 - 1023 seconds in 1 sec. increments

Reset Time: 300 milliseconds during timing cycle

Timing Tolerance:

  • ±10% max/±5% typical

Mode of Opertaion: Interval On Delay

Operating Temperature: -25° C to +85° C

Storage Temperature: -40° C to +85° C

Transient Protection:18 joules/varister

Voltage Drop in "On" State: 4 volts max/3 volts
nominal at 1 amp peak

Output Leakage Current in "Off" State:
6.4 mA at 265 VAC
3.3 mA at 120 VAC
1.6 mA at 48 VAC
1.0 mA at 24 VAC

Switching Current:
1 amp steady state max
10 mA min
10 amps inrush

Weight: 3 oz. (85g) maximum

Solid-State Output: SPST (N.O.)

Load Current: 1 amp continuous, 10 amps single-cycle surge

Time Cycle Interrupt: Resets timer to original state
(Input Voltage Break)
SELECTION PROCEDURE
Mode of Operation Series Input Voltage Time Ranges Time Adjustment Method
Interval On Delay THL
Standard Sixe
(2" x 2")

1 120 VAC

2 230 VAC

Variable Time Periods

1 to 1023 sec.

(in 1 sec. increments)


Site Designed and Maintained By Panther Marketing & Design