|
|
|
|
 |
Definite purpose contactors are available ranging from 30 to 90FLA. Models are available with 2, 3, or 4 poles, all are equipped with Box-lug/dual
.250" quick connect termination. Reduced power consumption coils help save energy and generate less heat – choose from 24Vac or 120Vac. Optional auxiliary contacts
in 1 or 2 SPDT are easily attached. Industry Standard Mounting Plate with easily accessible mounting holes are provided. All models are UL Component Recognized for U.S. and
Canada.
VIEW CHART
|
|
 |
The enclosures are NEMA1 rated and are UL Listed. They have an abundance of knockouts and most are stackable vertically and horizontally. Available
in a variety of sizes, the enclosures provide many useful features. Small sizes have screw lock covers and the larger sizes are equipped with key latch doors, most of which
are reversible.
VIEW
CHART
|
|
 |
Sub-Panels provide an internal mounting surface for control equipment. The polymetal sub-panels are designed to mount in model “MH”
metal housings and the mounting holes are pre-drilled, ready to install. They can be ordered pre-installed (see assembly kit numbers).
VIEW
CHART
|
|
 |
This is the newest product category to the Functional Devices family. These power control units are used to control 120Vac line power to building
automation panels or virtually any other load.
VIEW
CHART
|
|
 |
Our power supplies include one or two transformers pre-packaged in a metal enclosure and intended for mounting in the enclosure of the user’s
choice. The transformers are available in 40VA, 75VA, and 100VA. A switch / circuit breaker is provided for each transformer and on “B10” models a switch / circuit
breaker is present for controlling power for the entire unit. An LED indicates the presence of 24 Vac on the Class 2 terminals on the outside of the enclosure, or wires on
the inside. An internal high-voltage wiring compartment and two 120 Vac grounded convenience outlets are provided on most models. Each power supply series is available with
a number of various options. (Panel Style Power Supplies are also available)
VIEW
CHART
|
|
 |
Transformers ranging from 20VA to 375VA are foot or hub mounted. They are available with single or dual threaded hubs. Some are foot mounted
only. All are UL Listed or Recognized, and many are Class II. Several transformers are provided with a circuit breaker. Most transformers feature pigtail wires and are step-down
to 24 Vac. 24 Vac to 24Vac isolation and step-down to 120 Vac are also available.
VIEW
CHART
|
|
 |
Mounting options include plastic track for snap-mounting circuit boards. One style of track is screw mounted to the back surface of any enclosure.
Another style of track, AdapTrack®, snaps onto many of the most popular DIN or NEMA rails. Other accessories and replacement parts include: external sensors, lock assemblies,
drill screws, and keys.
VIEW
CHART
|
|
 |
PC Energy is a "PC" based energy management system for hotels, motels, schools, churches and commercial buildings. The system consists
of an IBM compatible computer, PC Energy software, and Functional Devices, Inc. Power Line Carrier (PLC) hardware. Functional Devices, Inc. PLC components virtually eliminate
the need for "hard wiring". Because the installation of the PLC devices does not involve the running of wires from the controller to the loads, the installation cost
of the system does not depend on the length of wire runs, the restrictions of concrete walls and floors or the hazards of asbestos removal.
MORE
INFO
|
|
 |
The BLASTER® system consists of compact 85 decibel horns which are simply plugged into one or more ac outlets in each family living unit.
A transmitter is connected to the main fire alarm system. In case of a fire, the BLASTER® system is activated by the existing bell network and a signal is sent out to sound
the horns in each family living unit. Communications from the Transmitter to all of the BLASTER horns is done over the building ac wiring. This wireless technology is called
Power Line Carrier and it eliminates expensive and unsightly conduit and wire runs.
MORE INFO
|
|
 |
Most ceiling fans are installed at locations where only lights existed before. Consequently, there is only one wall switch and one 120 Vac line
available to power your fan and light. To turn your fan and light on independendently you have to use those cumbersome pull chains or add another wall switch for the fan and
run a new wire between that switch and the fan. The Fan / Light Controller gives you independent control of the fan and the light by using your existing light switch in a simple
"off" and "on" 3 - step sequence.
MORE INFO
|
|
|
|
